EVtricity
Half Charge
Posts: 66
LEAF OWNER?: Yes
|
Post by EVtricity on Jun 1, 2017 22:47:30 GMT 11
Here is a photo of the switch config on the three phase stations. Confirming what Reecho found - set this to Legacy and the Outlander PHEV will charge. Leave it on normal and you can charge a Leaf but not an Outlander PHEV or imiev.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 2, 2017 15:18:42 GMT 11
And can charge i3 too on normal mode
|
|
|
Post by caroline on Jun 6, 2017 19:40:48 GMT 11
I ordered a tesla adapter cable today from Graeme at Suzi Auto
|
|
|
Post by markrmarkr on Jun 7, 2017 0:25:19 GMT 11
Here is a photo of the switch config on the three phase stations. View AttachmentConfirming what Reecho found - set this to Legacy and the Outlander PHEV will charge. Leave it on normal and you can charge a Leaf but not an Outlander PHEV or imiev. So short of opening up destination chargers and changing the dip switch, there is no way for Mitsubishis to use them. Bummer. I don't suppose there is any point in raising this with Tesla as it's pretty clear they don't want anyone else using them anyway.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 8, 2017 8:58:13 GMT 11
|
|
EVtricity
Half Charge
Posts: 66
LEAF OWNER?: Yes
|
Post by EVtricity on Jun 8, 2017 22:32:45 GMT 11
Hopefully Bob has tested his adaptor against Tesla three phase stations as the "Normal" signalling will not work with Tesla three phase stations unless the switch is set to legacy. It also seems a shame to cripple a 22kW station to put out just 3.6kW via a 15A single phase socket. Why not an adaptor like Greg or Mark's that supplies all of the 3 phase 32A the charging station can provide. From that you can plug a whole bunch of different portable EVSEs or chargers into it via a 6 way 15A splitter for an EV group ride/drive!
|
|
|
Post by markrmarkr on Jun 10, 2017 22:50:57 GMT 11
David, thanks again for making up the mennekes to 3 phase adapter. I tried it out on Wednesday night at Castle Hill Towers, on one of the Tesla destination chargers on the Red level. It worked brilliantly. Because of this I was able to use the Setec Portable Chademo at full power, and had plenty of charge to get home. here are some pics of it. I couldn't get any good pics in the carpark as it was almost pitch black, and I was worried about being hassled by security. So I didn't try.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 16, 2017 20:52:40 GMT 11
Bob's Cable doesn't work with my 2011 imiev
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 17, 2017 7:45:47 GMT 11
Bob's cable works on old style tesla HPWCs. Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 9, 2017 20:54:43 GMT 11
2011 imiev charging with bob’s new Tesla 1/3 phase to j1772 adaptor
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 27, 2019 13:12:08 GMT 11
|
|